Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures.
Inspect hoses and clamps. Pressure test cooling system. Flush engine, radiator, and heater core in both directions. Bring antifreeze to -35 degrees. PH balance coolant to between 9.8 to 10.5. Check thermostat and electric cooling fan operation. Chec
WATER PUMP – Remove & Replace – V8
michele g. gave our service a 5 star review on 8/28/2024
Install stainless steel true dual exhaust system with magnaflow muffler and customers tips. Mig weld all connections and fabricate new hangers, parts and labor
Zack c. gave our service a 5 star review on 8/12/2024
DISC ROTOR – Remove & Replace – Front,Both Sides – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
DISC ROTOR – Remove & Replace – Rear,Both – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Rotate and inspect tires and set all pressures
Joe W. gave our service a 5 star review on 8/1/2024
TIE ROD &/OR END – Remove & Replace – Rack & Pinion Type Gears,Inner,One Side – [Includes: R&I Outer Tie Rod End.] – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion St
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center steering wheel.
Cody E. gave our service a 5 star review on 4/17/2024