Multiple codes stored for various ABS/VSC systems related to sensor initialization. Inspected brake system. Brakes ok. Performed re programming of steering angle sensor, yaw rate sensor, and stroke sensor. Test drove. Op ok. No lights or codes. Front brakes squeal. May go away upon further driving. F brakes 75% R brakes 60%
Module Alignment, Reset ABS System Adaptations
Frank B. gave our service a 5 star review on 4/25/2025
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center steering wheel.
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures.
Dan H. gave our service a 5 star review on 4/21/2025
Remove and Replace Flex pipe and mig weld all connections Parts and Labor
WATER PUMP – Remove & Replace
Inspect hoses and clamps. Pressure test cooling system. Flush engine, radiator, and heater core in both directions. Bring antifreeze to -35 degrees. PH balance coolant to between 9.8 to 10.5. Check thermostat and electric cooling fan operation. Chec
Dale H. gave our service a 5 star review on 10/9/2024