Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures.
RADIATOR – Remove & Replace – Automatic Trans – [Includes: R&I Grille Assembly. R&I Air Conditioning Condenser, Recover, Evacuate and Recharge System.]
Drain and refill cooling system with correct coolant mixture. Inspect hoses, radiator, and connections for leaks or wear. Pressure test system for proper operation.
Julio R. gave our service a 5 star review on 11/14/2025
BRAKE SHOES &/OR PADS – Remove & Replace – Rear,Both Sides – [Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.]
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Jennifer R. gave our service a 5 star review on 9/24/2025
Drain and refill cooling system with correct coolant mixture. Inspect hoses, radiator, and connections for leaks or wear. Pressure test system for proper operation.
THERMOSTAT – Remove & Replace
Dave C. gave our service a 5 star review on 7/22/2025
BRAKE SHOES &/OR PADS – Remove & Replace – Front,Both Sides – [Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.]
BRAKE SHOES &/OR PADS – Remove & Replace – Rear,Both Sides – [Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.]
(Combination) – ELECTRONIC PARKING BRAKE SYSTEM – Disable & Enable Maintenance Mode – [Includes: Disable and enable electronic brake system with use of scan tool or interactive vehicle controls.]
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures.
elijah s. gave our service a 5 star review on 7/11/2025
Perform UV light inspection to identify the source of any refrigerant leaks after system recharge, using leak detection dye.
Evacuated and recharged the A/C system. Performed a vacuum test for leaks and refilled the system with refrigerant containing leak detection dye. Note: This is a diagnostic service, not a repair. If any leaks or issues persist, further A/C component replacements may be necessary at an additional cost. A follow-up appointment is recommended within 30 days to check for the source of the leak using UV light inspection.
Dan M. gave our service a 5 star review on 5/29/2025
Perform a basic OBD-II quick scan to read diagnostic trouble codes (DTCs) and check for any immediate issues. Provide customers with a preliminary report on the check engine light and potential issues. P0128 – Coolant Thermostat Rationality
Replaced 20 AMP fuse for ACC Power.
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures.
Jim S. gave our service a 5 star review on 3/28/2025