STABILIZER BAR CONTROL LINK – Remove & Replace – Both
OIL PAN &/OR GASKET – Remove & Replace – 4WD
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures.
TIMING COVER &/OR GASKET – Remove & Replace
DISC ROTOR – Remove & Replace – Front,Both – [Includes: Replace Pads (if necessary). DOES NOT include refinishing.]
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
karen t. gave our service a 5 star review on 6/21/2024
Perform smoke test on evap system for Evap system codes. The EVAP monitor checks for fuel vapor leaks (including a loose or missing gas cap). During EVAP system monitoring the PCM tests for vapor leaks by applying vacuum or pressure to the fuel tank, vap