2008 Toyota Tundra
Mileage
127,475
Service Date
4/2/2024
Services Performed
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures.
- DIFFERENTIAL FLUID – Drain & Refill – Rear Axle
- Rotate and inspect tires and set all pressures
- SPARK PLUGS – Remove & Replace – V8
- Inspect hoses and clamps. Pressure test cooling system. Flush engine, radiator, and heater core in both directions. Bring antifreeze to -35 degrees. PH balance coolant to between 9.8 to 10.5. Check thermostat and electric cooling fan operation. Chec
- Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Jake W. gave our service a 5 star review on 4/2/2024
