Mileage
157,037
Service Date
11/30/2023
Services Performed
- Perform smoke test on evap system for Evap system codes. The EVAP monitor checks for fuel vapor leaks (including a loose or missing gas cap). During EVAP system monitoring the PCM tests for vapor leaks by applying vacuum or pressure to the fuel tank, vap
- AIR FLOW SENSOR – Remove & Replace
- CALIPER – Remove & Replace – One Side – [Includes: Bleed Brake System and replace Pads (if necessary).]
- Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
- CONTROL ARM – Remove & Replace – Standard Trans Lower,Both – [DOES NOT include alignment.]
- Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center steering wheel.
- VALVE COVER GASKET – Remove & Replace
- TRANSAXLE OUTPUT SEAL – Remove & Replace – One Side – [DOES NOT include alignment.]
Kelly G. gave our service a 5 star review on 12/3/2023